Search results for " wastewater"

showing 10 items of 209 documents

Energy harvesting by waste acid/base neutralization via bipolar membrane reverse electrodialysis

2020

Bipolar Membrane Reverse Electrodialysis (BMRED) can be used to produce electricity exploiting acid-base neutralization, thus representing a valuable route in reusing waste streams. The present work investigates the performance of a lab-scale BMRED module under several operating conditions. By feeding the stack with 1 M HCl and NaOH streams, a maximum power density of ~17 W m−2 was obtained at 100 A m−2 with a 10-triplet stack with a flow velocity of 1 cm s−1, while an energy density of ~10 kWh m−3 acid could be extracted by a complete neutralization. Parasitic currents along feed and drain manifolds significantly affected the performance of the stack when equipped with a higher number of t…

Work (thermodynamics)Settore ING-IND/26 - Teoria Dello Sviluppo Dei Processi ChimiciControl and OptimizationMaterials scienceEnergy Engineering and Power TechnologySalt (chemistry)02 engineering and technology010501 environmental sciencespH gradient; waste to energy; ion-exchange membrane; wastewater valorization; controlled neutralization7. Clean energy01 natural scienceslcsh:TechnologyStack (abstract data type)Reversed electrodialysisWastewater valorizationElectrical and Electronic EngineeringIon-exchange membraneEngineering (miscellaneous)pH gradient0105 earth and related environmental sciencesPower densitychemistry.chemical_classificationRenewable Energy Sustainability and the Environmentlcsh:T021001 nanoscience & nanotechnology6. Clean waterWaste to energyMembraneSettore ING-IND/23 - Chimica Fisica ApplicatachemistryFlow velocityChemical engineeringAcid–base reaction0210 nano-technologyControlled neutralizationEnergy (miscellaneous)
researchProduct

Effect of extended famine conditions on aerobic granular sludge stability in the treatment of brewery wastewater

2017

Results obtained from three aerobic granular sludge reactors treating brewery wastewater are presented. Reactors were operated for 60 d days in each of the two periods under different cycle duration: (Period I) short 6 h cycle, and (Period II) long 12 h cycle. Organic loading rates (OLR) varying from 0.7 kg COD m-3 d-1 to 4.1 kg COD m-3 d-1 were tested. During Period I, granules successfully developed in all reactors, however, results revealed that the feast and famine periods were not balanced and the granular structure deteriorated and became irregular. During Period II at decreased 12 h cycle time, granules were observed to develop again with superior structural stability compared to the…

Environmental Engineering0208 environmental biotechnologySewageBioengineering02 engineering and technologyBiological Oxygen Demand AnalysisWastewater010501 environmental sciencesWaste Disposal Fluid01 natural sciencesIndustrial wastewater treatmentBioreactorsExtracellular polymeric substanceBioreactorFood IndustryWaste Management and Disposal0105 earth and related environmental sciencesBiological Oxygen Demand AnalysisSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleBacteriaSewageRenewable Energy Sustainability and the Environmentbusiness.industryChemistryGranule (cell biology)Environmental engineeringGeneral MedicinePulp and paper industryAerobiosisCarbon020801 environmental engineeringWastewaterExtracellular polymeric substances Feast/famine Aerobic granular sludge Industrial wastewater StabilityFaminebusinessBioresource Technology
researchProduct

Start-Up of Chitosan-Assisted Anaerobic Sludge Bed Reactors Treating Light Oxygenated Solvents under Intermittent Operation

2021

Quality of the granular sludge developed during the start-up of anaerobic up-flow sludge bed reactors is of crucial importance to ensure the process feasibility of treating industrial wastewater such as those containing solvents. In this study, the microbial granule formation from suspended-growth biomass was investigated in two chitosan-assisted reactors. These reactors operated mimicking industrial sites working with night closures treating a mixture of ethanol, ethyl acetate, and 1-ethoxy-2-propanol. Each reactor operated under different hydrodynamic regimes typical from UASB (R1: &lt

Health Toxicology and Mutagenesis0208 environmental biotechnologyEthyl acetate02 engineering and technology010501 environmental sciencesWaste Disposal Fluid01 natural sciencescomplex mixturesArticleIndustrial wastewater treatmentchemistry.chemical_compoundGranulationBioreactorsgranulationAcetobacteriumAigües residualsAnaerobiosis0105 earth and related environmental sciencesSewagebiologyChemistryGranule (cell biology)RPublic Health Environmental and Occupational Healthtechnology industry and agriculturehigh-throughput sequencingbiology.organism_classificationPulp and paper industryequipment and suppliesDesulfovibriointermittent feedingInnovacions tecnològiques020801 environmental engineeringsolventsMedicineEnginyeria ambientalanaerobic reactorschitosanAnaerobic exerciseGeobacterInternational Journal of Environmental Research and Public Health
researchProduct

Correlation of wood-based components and dewatering properties of waste activated sludge from pulp and paper industry.

2010

Large amounts of wet sludge are produced annually in municipal and industrial wastewater treatment. Already in pulp and paper industry, more than ten million tons of primary sludge, waste activated sludge, and de-inking sludge is generated. Waste activated sludge contains large quantities of bound water, which is difficult to dewater. Low water content would be a matter of high calorific value in incineration but it also has effects on the volume and the quality of the matter to be handled in sludge disposal. In this research waste activated sludges from different pulp and paper mills were chemically characterised and dewatered. Correlations of chemical composition and dewatering properties…

characterisationPaperEnvironmental EngineeringIndustrial WasteIndustrial wastewater treatment/dk/atira/pure/sustainabledevelopmentgoals/sustainable_cities_and_communitiespulp and paper industrywood-based componentsWater Science and TechnologyWaste managementSewageWaterPulp and paper industryDewateringWoodSDG 11 - Sustainable Cities and CommunitiesMixed liquor suspended solidsIncinerationWaste treatmentsludgeActivated sludgeEnvironmental scienceSewage treatmentSludgedewateringWater science and technology : a journal of the International Association on Water Pollution Research
researchProduct

Interlinkages between operational conditions and direct and indirect greenhouse gas emissions in a moving bed membrane biofilm reactor

2016

Nitrous oxide (N2O) can be emitted during wastewater treatment contributing to the global warming due to its high global warming potential,. During the last ten years, several efforts have been provided to improve knowledge on: key mechanisms, operating factors and influent features affecting the N2O production/emission. However, the knowledge on the investigated issues is not completely mature. Indeed, in terms of mathematical modelling, literature shows that a reliable model has not yet been established due to the huge data set required and the complexity of the mechanistic models indicated as the most accurate. In this work, the first attempt to perform a multiregression analysis is pres…

regression analysiSettore ICAR/03 - Ingegneria Sanitaria-Ambientalenutrientspilot plantN2OGHGwastewaterGHG; regression analysis; wastewater; N2O; pilot plant; nutrients
researchProduct

Greenhouse Gas Emissions from Wastewater Treatment Plants on a Plantwide Scale: Sensitivity and Uncertainty Analysis

2016

This paper presents the sensitivity and uncertainty analysis of a mathematical model for greenhouse gas emission (GHG) and energy consumption assessment in wastewater treatment plants. A sensitivity analysis was carried out (using two different methods) to determine which model factors have the greatest effect on the predicted values of the GHG production. Further, an uncertainty analysis was carried out to quantify the uncertainty of the key model outputs, such as carbon dioxide production from activated sludge treatment. The results show that influent fractionation factors, which characterize influent composition, have an important role on direct and indirect GHGs production and emission.…

Environmental Engineering0208 environmental biotechnologyBiomassWastewater treatment02 engineering and technology010501 environmental sciences01 natural sciencesGreenhouse gaEnvironmental ChemistryProduction (economics)Uncertainty analysis0105 earth and related environmental sciencesGeneral Environmental ScienceCivil and Structural EngineeringEnergy demand2300Settore ICAR/03 - Ingegneria Sanitaria-AmbientaleEnvironmental engineeringEnergy consumptionCarbon footprint020801 environmental engineeringCarbon footprint; Energy demand; Greenhouse gas; Mathematical modeling; Wastewater treatment; Environmental Engineering; 2300; Environmental Chemistry; Civil and Structural EngineeringElectricity generationGreenhouse gasCarbon footprintEnvironmental scienceMathematical modelingSewage treatmentJournal of Environmental Engineering
researchProduct

Hybrid activated sludge/biofilm process for the treatment of municipal wastewater in a cold climate region: a case study.

2011

A hybrid activated sludge/biofilm process was investigated for wastewater treatment in a cold climate region. This process, which contains both suspended biomass and biofilm, usually referred as IFAS process, is created by introducing plastic elements as biofilm carrier media into a conventional activated sludge reactor. In the present study, a hybrid process, composed of an activated sludge and a moving bed biofilm reactor was used. The aim of this paper has been to investigate the performances of a hybrid process, and in particular to gain insight the nitrification process, when operated at relatively low MLSS SRT and low temperatures. The results of a pilot-scale study carried out at the…

Environmental EngineeringWaste managementSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleSewageMoving bed biofilm reactorNorwayBiomassPilot ProjectsCold ClimateWaste Disposal FluidMixed liquor suspended solidsQuaternary Ammonium CompoundsActivated sludgePilot plantWastewaterBiofilmsActivated sludge Biofilm Hybrid reactors MBBR Nitrification Wastewater treatmentEnvironmental scienceNitrificationSewage treatmentWater Pollutants ChemicalWater Science and TechnologyWater science and technology : a journal of the International Association on Water Pollution Research
researchProduct

Multicriteria performance analysis of an integrated urban wastewater system for energy management

2017

AbstractThe optimization and management of an integrated urban wastewater system is a complex problem involving many processes and variables. The possible control options are defined by several management strategies that may differently impact the economic, operational or environmental performance of the system. The present paper aims to contribute to the environmental and energy sustainability of urban wastewater systems by means of a multicriteria performance analysis. The paper begins with a complete analysis of the system performance in several fields of interest (energy, environment, quality of service, operation, economy and financial resources), and it highlights the management stren…

EngineeringAtmospheric ScienceEnergy management0208 environmental biotechnologyControl (management)Urban water cycle02 engineering and technology010501 environmental sciences01 natural sciencesEnergy sustainabilityIntegrated Urban Wastewater System0105 earth and related environmental sciencesCivil and Structural EngineeringWater Science and Technologybusiness.industryQuality of serviceSettore ICAR/02 - Costruzioni Idrauliche E Marittime E IdrologiaEnvironmental engineeringDecision Support SystemEnvironmental economicsGeotechnical Engineering and Engineering Geology020801 environmental engineeringPerformance IndicatorWastewater systemsEnergy ManagementbusinessStrengths and weaknesses
researchProduct

Wastewater modification processes assessment in a stabilization reservoir.

2008

A semi-empirical mechanistic model able to simulate the dynamics of a stabilization reservoir was developed incorporating both settling of particulate components and chemical/biological processes. Several factors affecting the reservoir effluent quality were taken into account: hydraulics and hydrology, solar radiation, atmospheric reaeration, algae, zooplankton, organic matter, pathogen bacteria, and sediment-water interaction. The model quantifies the specific influence of each factor on effluent quality, evaluating the correlation between the different considered factors. State variables included in the model were: algae, dissolved oxygen, organic matter, zooplankton and indicator bacter…

Environmental EngineeringTime FactorsHydraulicsWastewater treatmentMathematical modelling Stabilization reservoir Wastewater reuse Wastewater treatmentWastewater reuseWaste Disposal FluidZooplanktonlaw.inventionHydrology (agriculture)SettlinglawAnimalsOrganic matterComputer SimulationEffluentWater Science and Technologychemistry.chemical_classificationMathematical modellingStabilization reservoirEnvironmental engineeringParticulateschemistryWastewaterModels ChemicalEnvironmental scienceSewage treatmentWater Pollutants Chemical
researchProduct

Simulation and control of dissolved air flotation and column froth flotation with simultaneous sedimentation.

2020

Abstract Flotation is a separation process where particles or droplets are removed from a suspension with the aid of floating gas bubbles. Applications include dissolved air flotation (DAF) in industrial wastewater treatment and column froth flotation (CFF) in wastewater treatment and mineral processing. One-dimensional models of flotation have been limited to steady-state situations for half a century by means of the drift-flux theory. A newly developed dynamic one-dimensional model formulated in terms of partial differential equations can be used to predict the process of simultaneous flotation of bubbles and sedimentation of particles that are not attached to bubbles. The governing model…

Environmental EngineeringArithmetic underflowSedimentation (water treatment)Dissolved air flotationAir02 engineering and technologyMechanics010501 environmental sciencesWastewater021001 nanoscience & nanotechnology01 natural sciencesSeparation processSuspension (chemistry)Water PurificationIndustrial wastewater treatmentEnvironmental scienceFroth flotation0210 nano-technologyMineral processing0105 earth and related environmental sciencesWater Science and TechnologyWater science and technology : a journal of the International Association on Water Pollution Research
researchProduct